How to Apply Iron Orchid Designs Transfers – Step-by-Step Guide

How to Apply Iron Orchid Designs Transfers

– Step-by-Step Guide

Iron Orchid Designs (IOD) Décor Transfers are one of the easiest ways to transform furniture, walls, glass and even fabric. With beautiful florals, botanicals and typography designs, each transfer pad comes with multiple sheets you can cut, layer and apply for an instant hand-painted look. Whether you’re new to upcycling or an experienced maker, the process is simple—and the results are stunning.

👉 Browse the full range here: [IOD Transfers Collection]

What Are Iron Orchid Designs Transfers?

IOD Décor Transfers are pressure-sensitive designs that rub onto a prepared surface. They add vintage charm or bold detail without the need for painting skills. Transfers work best on matte, fully cured painted furniture, sealed wood, glass or walls.

• Sheets are generously sized (usually 4–8 per pad).

• Designs include florals, typography, patterns and seasonal themes.

• As an official UK stockist, Doodledash supplies the entire range, including favourites like Lost Garden, Spring Melody and Wild Berries.

What You’ll Need

Before you start, gather these supplies:

• Your chosen IOD transfer pad.

• The included burnishing stick.

• Scissors (to cut designs).

• A good water-based sealer or topcoat (for after application).

Step-by-Step Application

Step 1 – Prep Your Surface

Make sure your piece is clean, smooth, and fully cured. Matte or chalk paint surfaces work best. Avoid glossy finishes.

Step 2 – Position & Cut

Cut the design into manageable sections. Position it where you’d like and secure with low-tack tape if needed.

Step 3 – Burnish Firmly

Use the plastic stick, included in the pack, to rub the transfer onto the surface. Work slowly and evenly.

Step 4 – Peel the Backing Sheet

As you rub, lift the clear sheet gently. If parts haven’t transferred, lay it back down and rub again.

Step 5 – Seal for Protection

Once the design is in place, lightly buff using the carrier sheet the transfer was on to ensure it is completely adhered. Seal with a water-based topcoat to protect your work.

Tips for Best Results

• Cut large designs apart and layer them for a custom layout

• Overlap edges for seamless looks

• Practice on a small scrap surface before starting your main piece

FAQs

Do I need to seal IOD transfers?

Yes, always apply a water-based sealer for durability.

Can I reposition a transfer?

No—once it’s rubbed on, it adheres permanently. Cut smaller pieces if you’re unsure.

How long will transfers last?

With proper sealing, transfers last as long as the surface finish itself.

Conclusion

Iron Orchid Designs transfers make it easy to achieve a professional, hand-painted effect without hours of freehand work. With a little preparation and careful application, you’ll transform furniture, walls, and décor in minutes.

👉 Ready to try it?

Explore our bestselling transfers like Lost Garden, Wallflower and Wilde Bloemen today