Using Iron Orchid Designs Decor Products
IOD Décor Stamps
For anyone who hasn’t used the IOD Décor Stamps, they are essentially what they sound like. A stamp. Similar to a stamp that you might’ve used as a child- but magical. The IOD Décor Stamps have the power to transform an item that you found on the side of the road to an item that you will have to convince your husband you didn’t spend your entire monthly budget on. Yeah, that good.
But wait- there’s more. The IOD décor stamps aren’t just for furniture and home décor, you can use them to transform your food art as well! The stamps are made from a food safe material (do not use the same sets for food and paint ;)). But be warned- they are not for high heat applications. Do NOT put in dishwasher, they will melt at extreme heats. And then you will be extremely heated too.
Preparation is key
Before removing from backing, condition your stamps with very fine sandpaper, scuff the surface in two directions. This helps the mediums stay put, and not bead (which some types, like ceramics glazes, tend to do).
Remove stamps from backing when ready to use. This takes some force, but don’t worry, the stamps are strong.
Different mounts for different surfaces
Freestyle stamping. This is what we call it when you use a flexible piece of plastic, such as the clear sheet that came with the stamps, as a mounting device. Simply position the stamp on the sheet and proceed. This is great for irregular surfaces such as walls or furniture (surprisingly, many furniture surfaces that appear flat have dips- this method will conform nicely).
No mount. This is when you would use the stamp without mounting to anything, because you want it to really conform to a curved surface, or even stretch. When using the bare stamp make sure that your fingers don’t stick to it, this could cause the stamp to lift from the surface and create a smudge. Nobody likes an unintentional smudge.
Whichever mounting method you use, the stamp backs must be perfectly clean, as well as the mount, in order for the stamp to cling firmly to the mount.
Paint: Paint works wonderfully with the Décor Stamps. When using paint we recommend creating a small puddle to roll a small dense foam roller in. Make sure you get an even load and roll onto the design side of the mounted (or if using unmounted, proceed accordingly) stamp. This part takes a little practice to get the feel of the load so that it’s enough to give you the impression you want without being sloppy. Also keep in mind variables such as the surface you are stamping, the medium you are using, as well as the look you are trying to achieve. Practice makes perfect!
Ink: Our Décor ink, and most other inks, work fabulously with the Décor Stamps as well. Ink gives finer detail and tends to be a little more translucent than paint, keep this in mind in consideration to your project. We find that we like using paint and ink equally, and they lend themselves well to different projects and surfaces. We recommend using the blank stamp pads to apply the ink (one for each color), then pat the surface of the stamp with it.
Surfaces and Applications
Fabric: When stamping fabric the load of medium should be generous in order to penetrate the fibers, and the look will be different with different levels of fabric texture. Décor ink, Chalk paint and other fabric suitable mediums work well. It is our opinion that the ideal fabric for permanent washables is 100 percent cotton. However, blends and some other natural fibers can sometimes work as well. Do a small test to be sure. Allow your newly stamped fabric to dry/cure for a minimum of 24 hours, then heat set with an iron on high heat before washing.
Furniture: Both painted and stained furniture can be stamped. In fact, this is one of the most common uses of our Décor Stamps. You can use ink or paint.
Walls: Walls are a fabulous surface opportunity for Décor Stamps. Create all over patterns that are a level up from wallpaper, and completely custom, or use the décor stamps to create an old world border. We love using paint for wall applications!
Caring for your stamps
We find that the easiest way to care for and clean stamps is to keep wet wipes nearby, and avoid letting the medium dry all the way on the stamp surface. Then, when you have time, wash them with mild soap and warm water. For some mediums you may find that you need a stamp cleaner. Use one that is safe for clear stamps. After thoroughly cleaned, place them back on the clear backing for storage
IOD Décor Moulds
The IOD Décor Moulds are made from food safe materials (do not use the same set for food and crafts), and can be used to transform and create baked goods, furniture, soaps, jewelry, and just about anything you can think up in that creative brain of yours.
IOD Décor Moulds can be used with many different mediums. We will cover the two most common here. Every medium has its own characteristics, challenges, and virtues.
Air dry clay, or paper clay: IOD paper clay is an air dry medium, and one of our favorites. Like most paper pulp based air dry clays, some shrinking, warping, and cracking is inherent. We like these qualities for a distressed, authentically vintage look. Our favorite way to apply moulded pieces is to remove them from the mould while still moist, and adhere to the surface with the appropriate glue so it conforms well. For vertical surfaces, use a piece of low tack tape to hold it in place so it doesn’t slide.
Casting resins: There are some great pourable resins available. These have completely different qualities than the paper clay. There is no shrinking or warping, and the castings are more consistent. Depending on the project, these qualities can be helpful. If you need to conform them to a curved surface, this can be done if removed from the mould before it’s completely hardened.
On releases: We find that most of the time a release is not necessary and the casting will come out without the use of a release, however, if you are having trouble with the material sticking (more common with clays than resins), a light dusting of simple cornstarch or arrowroot before casting is a great choice.
IOD Décor Transfers
IOD Décor Transfers are delicate, need a little extra care, but are so worth it. With a little instruction, they are easy to use and add instant style to your projects.
Preparation is key
Keep your transfer with its backing sheet until you are ready to apply. Keep free of dust or debris, which will interfere with adhesion. Do not allow the adhesive side of transfer to touch anything prior to application. When handling the transfer, avoid letting the adhesive side touch itself (don't do in a windy environment). Do not store transfer in extreme temperatures or humid conditions, which can affect adhesion
Start with a clean, dry, matte surface. If painted, make sure it's well cured, and if you have sanded the paint make certain there is no residual dust. All of these things will interfere with adhesion.
Carefully remove the transfer from its white backing. Slowly and carefully lower the transfer onto your intended surface, making sure that it does not touch until the placement is correct. Use small pieces of low tack tape to hold it in place.
Using the provided tool, or one of your choice, start at one end of the transfer and rub firmly to adhere the image to the surface. Do this until the entire image is transferred. You are welcome for the free arm workout as well. If any parts aren't transferred when you lift, simply lay it back down and rub more on that portion. After it is transferred you need to burnish it (polish it) with a clean dry cloth to smooth down any bits that aren’t flatly adhered.
We recommend sealing with Frenchic Finishing Coat ot wax.